Slats and Flaps locked in Config 0
Procedure to handle situation of "Slats and Flaps locked in Config 0" on an Airbus A320 family aircraft.
Procedure
| Flaps Lever: | Recycle |
| + If both Slats channels fail: Max Speed: F/CTL ALTN LAW (PROT LOST) |
320 kts |
| + If both Flaps channels fail: Max Speed: ALTN LAW (PROT LOST) |
320 kts |
Approach Procedure
| For Landing: (note: with Flap Lever at 1, Autopilot and F/D Go-Around Mode is available) |
Use Flaps 1 |
| GPWS Flap Mode: | Off |
| Approach Speed: (note: Approach with Autothrust in selected mode is recommended) |
Vref +60 kts |
| If in ALTN LAW: When Landing Gear Down: |
DIRECT LAW |
| + At 300 ft AGL: Target Speed: (note: Reduce speed between 500 and 300 ft to reach Vref+55 at Runway Threshold and disconnect A/THR since the target speed may be below VLS) |
Vref +55 kts |
| Landing distance procedure | Apply |
Warning
Only for Flight Simulation!